Doors consist of frames constructed from kiln-dried 3/4-in solid hardwood with mortise and tenon or mitered joints and floating center panels.
Cabinet side panels are 1/2-in thick and made of engineered wood with our rigorous multistep TuffTech® UV-cured finish. They are captured into a grooved front face frame and secured using high-strength fasteners and glue.
Cabinet face frames are made from 3/4-in x 1-5/8-in solid hardwood, and are kiln-dried to prevent warping. Face frame joints are pressure-fitted, glued, double-doweled and stapled.
Fully-concealed, 6-way adjustable, Hidden Hinges®.
Side-mounted drawer glides on drawers and roll-out accessories
All standard drawers are 5/8-in thick 18-in deep natural finish dovetailed hardwood with laminated MDF bottoms and side-mounted drawer glides. All drawers meet KCMA load standards of 15 pounds per square foot.
Deep Roll Out Accessories are 5/8-in thick 18-in deep natural finish dovetailed hardwood with MDF bottoms and 3/4-in access side-mounted drawer glides. All roll out trays meet KCMA load standards of 15 pounds per square foot.
Cabinet shelves are 3/4-in thick engineered wood with our TuffTech® finishing system in natural woodgrain. Shelves are banded on one side with PVC edge banding. Base and Wall Refrigerator cabinets feature half depth shelves. Wall and tall cabinet shelve features are adjustable and meet KCMA load standards of 15 pounds per square foot.
Nickel plated 1/4-in steel metal shelf rests are standard on all Wall cabinets and Bookshelves. Clear high-strength polycarbonate clip lock shelf rests are standard on all Base and Tall cabinets.
Inset toe kicks are constructed of 1/2-in thick unfinished engineered wood and are recessed 3-1/2-in. BTK8 (matching toe kick) required for installation.
Cabinet tops, bottoms and floors are 1/2-in thick and made from engineered wood. They are finished with our TuffTech® finishing system in natural woodgrain. They are fitted and glued into the cabinet front face frame grooves, then captured in the grooves of the cabinet side panels.
The cabinet back is made from 1/8-in thick hardboard substrate. The inside cabinet surface is finished with our TuffTech® finishing system.
Base cabinets have one 3/4-in thick hanging rail made of hardwood, mortise and tenon joined and glued to the cabinet side panels. The wall cabinet have two hanging rails are 1/2-in thick engineered wood, glued and pinned into the cabinet back, cabinet side panels and top/bottom.
Corner blocks are attached to help ensure cabinet squareness and allow for proper countertop installation.